Appendix 14.4 Explanation of printout examples
Edition 07/2007 Technical Description DTCO 1381 14 - 27
TD00.1381.00 132 102
Identification of the DTCO 1381
• Tachograph manufacturer
• Address of the tachograph manufacturer
•Part number
• Type approval number
• Serial number
•Year of manufacture
• Version and date of installation of the user software
Identification of the KITAS 2171
• Serial number
• Type approval number
• Date of initial installation
Calibration data
Listing of the calibration data (in data sets)
• Name and address of the workshop
•Workshop identification
• Workshop card valid until ...
• Date and purpose of the calibration
= Activation
(Recording of known calibration data at the time of activation
= Initial installation (first calibration data after activation of the DTCO 1381)
= Installation (first calibration data in current vehicle, identified by the VIN)
= Regularly inspection (calibration data of a periodic inspection)
• Vehicle identification number
• Authorizing member state and registration number
• X = Characteristic coefficient of the vehicle
• L = DTCO 1381 constant
• M = Actual circumference of tires
• q = Tire size
• w = Speed limiter setting
• Old and new odometer reading
Remark
In the example, this data is available only in the next data set.
Pos. / block Data block specification / explanation
14
15
16
16a
16b
To Next Page
Loading...
