Regularly inspection 11.6 Performing the regularly inspection
Edition 07/2007 Technical Description DTCO 1381 11 - 13
TD00.1381.00 132 102
11.6.1 Inserting workshop card
Fig. 11 - 2: Inserting workshop card
1. Switch ignition on (required only for ADR variant).
2. Eject any tachograph cards that may be already inserted.
3. Insert workshop card into card slot 1 with the chip facing up
(after insertion, the card will be automatically locked mechani-
cally).
• The subsequent procedure is menu-guided.
The following description of "Inserting workshop card" is based on a
DTCO 1381 that is already activated.
For detailed information on activating the DTCO 1381, see chapter
9.3 "Performing the activation", page 9-8.
To Next Page
Loading...
