Installation 5.1 General instructions
Edition 07/2007 Technical Description DTCO 1381 5 - 5
TD00.1381.00 132 102
5.1.4 Other instructions
Proper use The DTCO 1381 is an EC recording equipment that complies with
CR (EEC) 3821/85, annex I B for the registration, saving, display,
printing, and outputting of driver-based and vehicle-based data. It
may be used only for the purpose for which it is designed.
Power supply The DTCO 1381 may only be connected to voltages for which it is
designed and which can be seen in the wiring diagram (label).
Accessories For reasons of operational safety, no alterations may be made to the
accessories.
Do not use any accessories other than those recommended or
approved by the manufacturer in order to help avoid accidents and
operational disruptions.
Cables When laying the cables, make sure that they are undamaged, that
other objects or sources of heat cannot cause damages, and that the
lines cannot cause any undesired interference or disturbances.
Caution! Danger of fire due to short circuit
Damaged cables can cause short circuits, undesired interferences, or
disturbances.
Always replace damaged cables immediately!
To Next Page
Loading...
