Siemens VDO DTCO 1381 - 3.5 Preparing for data download

Service only
Operating the DTCO 1381 3.5 Preparing for data download
Edition 07/2007 Technical Description DTCO 1381 3 - 21
TD00.1381.00 132 102
3.5 Preparing for data download
Fig. 3 - 2: Connection to the download interface
1. Insert workshop card, see chapter 3.4.1 "Inserting workshop
card", page 3-16.
2. Open the covering cap (1) to the right.
3. Insert data cable (3) into the download interface (2) and the
laptop (4).
4. Start the reading software.
5. After downloading the data, make sure you always close the
covering cap (1).
1
3
4
2
For detailed information about the reading software, please refer to
the appropriate documentation.
For detailed information about a appropriate reading software,
please refer to a Siemens VDO sales office or the traffic Ministry.