Events and faults 13.4 Messages and troubleshooting measures
Edition 07/2007 Technical Description DTCO 1381 13 - 31
TD00.1381.00 132 102
jr
jr
DBSEáOPUáDMPTFE
4000000200
4000000300
When a driver or workshop card (in card slot 1 or 2) is read it
is determined that the card was not properly withdrawn in
the last vehicle or the data was not saved properly.
Measures
– Check tachograph card.
– Check previous EC recording equipment.
Comment
The source of the error is not located in the current
DTCO 1381.
PWFSTQFFE 00000005B1 The programmed maximum speed was exceeded for longer
than 60 seconds.
Measures
– Reduce speed.
DTCO 1381 display
Picto. AP Error text MC Error code Meaning, cause and measures
1)
These warning messages will be displayed repetitively every hour until the cause is withdrawn.
2)
These warning messages are not saved in the date memory during calibration mode.
To Next Page
Loading...
