Silca UC 199 - Page 66

Select start menu:
Main menu
1- Copy from original
2- Copy with adjust.
3- Queue from PC
* = Main menu
1 = Copy from original
2 = Copy with corrections
3 = Queue from PC
ATTENTION: press the “CLEAR” key to void any selection made and to select the main (*)
menu function.
3 / Quick menu: Unavailable function.
Non-feasible
function !
4 / Correction of copy:
if enabled (=1) used to maintain the adjusted value with the function: “Copy with adjustments”.
4- Copy with adjust.
Keep the
adjustement = 0
(1=Enabled)
Operational keys: arrow keys [> <] to choose the option, ENTER to conrm.
6 - LANGUAGE:
This menu is used to choose the required language.
Select language = 2
1-Italian 2-English
3-Deutsch 4-Francais
5-Espanol
Operational keys: arrow keys [><] to choose the option, ENTER to conrm.
7 – CLOCK:
This menu is used to set the values for Date and Time.
DATE-TIME SETTING
Date: 00/00/00
Time: 00:00:00
Press the arrow keys (Up/Down) to change the sector to be edited, then use the arrow keys [< >] to set the exact
gure.PressENTERtoconrm.STOPtoexit.
Operating Manual UC199
Copyright Silca 2012
62