SimCom SIM5350 User Manual

SIM5350 AT Command Set
AT+CGEQREQ=? +CGEQREQ: <PDP_type>,(list of supported <Traffic class>s),(list
of supported <Maximum bitrate UL>s),(list of supported <Maxim
um bitrate DL>s),(list of supported <Guaranteed bitrate UL>s,(list
of supported <Guaranteed bitrate DL>s),(list of supported <Deliv
ery order>s),(list of supported <Maximum SDU size>s),(list of
supported <SDU error ratio>s),(list of supported <Residual bit error
Ratio>s),(list of supported <Delivery of erroneous SDUs>s),(list of
Supported <Transfer delay>s),(list of supported <Traffic handling
priority>s)
OK
Read Command Responses
AT+CGEQREQ? +CGEQREQ: [<cid>,<Traffic class>,<Maximum bitrate UL>,<Ma
ximum bitrate DL>,<Guaranteed bitrate UL>,<Guaranteed bitrate
DL>,<Delivery order>,<Maximum SDU size>,<SDU error ratio>,
<Residual bit error ratio>,<Delivery of erroneous SDUs>,<Transfer
Delay>,<Traffic handling priority>][<CR><LF>
+CGEQREQ: <cid>,<Traffic class>,<Maximum bitrate UL>,<Ma
ximum bitrate DL>,<Guaranteed bitrate UL>,<Guaranteed bitrate
DL>,<Delivery order>,<Maximum SDU size>,<SDU error ratio>,
<Residual bit error ratio>,<Delivery of erroneous SDUs>,<Transfer
Delay>,<Traffic handling priority>[…]]
OK
Write Command Responses
OK
ERROR
AT+CGEQREQ=<cid>[,<Tr
affic class>[,<Maximum bit
rate UL>[,<Maximum bitrat
e DL>[,<Guaranteed bitrate
UL>[,<Guaranteed bitrate
DL>[,<Delivery order>[,<M
aximum SDU size>[,<SDU
error ratio>[,<Residual bit
error ratio>[,<Delivery of e
rroneous SDUs>[,<Transfer
delay>[,<Traffic handling p
riority>]]]]]]]]]]]]
+CME ERROR: <err>
Defined values
<cid>
(see +CGDCONT and +CGDSCONT commands) A special form of the set command, +CGEQREQ=<cid>
causes the requested profile for context number <cid> to become undefined.
<Traffic class>
SIM5350_ATC_V1.02 6/9/2014
126

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English