SimCom SIM5350 User Manual

SIM5350 AT Command Set
AT+CGFUNC=1,1
OK
AT+CGFUNC=1
+CGFUNC: 1
OK
NOTE: Not all of the Modules of SIM5350 series have the whole upper functions, please refer the Module
SPEC for more details.
9.9 AT+CWIIC Write values to register of IIC device
Description
This command is used to write values to register of IIC device.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CWIIC=? OK
Write Command Responses
OK AT+CWIIC=
<addr>,<reg>,<data>
ERROR
Defined values
<addr>
Device address. Input format must be hex, such as 0xFF.
<reg>
Register address. Input format must be hex, such as 0xFF.
<data>
Data written. Input format must be hex, such as 0x00 – 0xFF.
Examples
AT+CWIIC=0x1A, 0x01, 0x12
OK
9.10 AT+CRIIC Read values from register of IIC device
Description
SIM5350_ATC_V1.02 6/9/2014
136

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English