SimCom SIM5350 User Manual

SIM5350 AT Command Set
SIM PIN References
YES V.25ter
Syntax
Read Command Responses
ATS0 ? <n>
OK
Write Command Responses
ATS0=<n> OK
Defined values
<n>
0 Automatic answering is disabled.
Examples
ATS0?
000
OK
ATS0=0
OK
3.10 ATS3 Set Command Line Termination Character
Description
Command line termination character This S-parameter represents the decimal IA5 value of the
character recognized by the DCE from the DTE to terminate an incoming command line. It is also
generated by the DCE as part of the header, trailer, and terminator for result codes and information
text, along with the S4 parameter (see the description of the V parameter for usage).
SIM PIN References
YES V.25ter
Syntax
Write Command Responses
OK ATS3=<value>
ERROR
Defined values
SIM5350_ATC_V1.02 6/9/2014
18

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English