SimCom SIM5350

SIM5350 AT Command Set
AT+CNUM=? OK
Execution Command Responses
[+CNUM: <alpha>,<number>,<type>[<CR><LF>
+CNUM: <alpha>, <number>,<type> [...]]]
OK
AT+CNUM
+CME ERROR: <err>
Defined values
<alpha>
Optional alphanumeric string associated with <number>, used character set should be the one
selected with command Select TE Character Set AT+C SC S.
<number>
String type phone number of format specified by <type>.
<type>
Type of address octet in integer format.see also AT+CPBR <type>
Examples
AT+CNUM
+CNUM: ,"13697252277",129
OK
6.17 AT+CIMI Request international mobile subscriber identity
Description
Execution command causes the TA to return <IMSI>, which is intended to permit the TE to identify
the individual SIM card which is attached to MT.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command Responses
AT+CIMI=? OK
Execution Command Responses
AT+CIMI <IMSI>
OK
Defined values
<IMSI>
SIM5350_ATC_V1.02 6/9/2014
73