SimCom SIM5350 User Manual

SIM5350 AT Command Set
9.15 AT+CCODECS Codec chips select
Description
This command is used to select codec chip. SIM5350 supports WM8974 codec and WM8960
codec. The selected codec chip will be initialized after boot up automatically. If one wants to make
a call use codec must ensure that the AT+CPCM=1.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CCODECS=? +CCODECS: (0-2)
OK
Read Command Responses
AT+ CCODECS? +CCODECS: <chip>
OK
Write Command Responses
+CCODECS: <chip>
OK
AT+CCODECS=<chip>
ERROR
Defined values
<chip>
0 no codec
1 WM8974 codec
2 WM8960 codec
Examples
AT+CCODECS=?
+CCODECS: (0-2)
OK
AT+CCODECS = 1
+CCODECS: 1
OK
SIM5350_ATC_V1.02 6/9/2014
141

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English