SimCom SIM5350 - AT+CMGF Select SMS Message Format

SIM5350 AT Command Set
"MT" Any of storages associated with ME (SM first)
<usedX>
Integer type, number of messages currently in <memX>.
<totalX>
Integer type, total number of message locations in <memX>.
Examples
AT+CPMS=?
+CPMS:("SM","ME","SM_P","ME_P","MT"),("SM","ME","SM_P","ME_P","MT"),("SM","ME","
SM_P","ME_P","MT")
OK
AT+CPMS?
+CPMS:"ME", 0, 23,"ME", 0, 23,"ME", 0, 23
OK
7.4 AT+CMGF Select SMS message format
Description
This command is used to specify the input and output format of the short messages.
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command Responses
+CMGF: (list of supported <mode>s)
OK
AT+CMGF=?
ERROR
Read Command Responses
+CMGF: <mode>
OK
AT+C MG F?
ERROR
Write Command Responses
OK AT+CMGF=<mode>
ERROR
Defined values
SIM5350_ATC_V1.02 6/9/2014
87