SIM5350 AT Command Set
String type phone number in format specified by <type>.
<type>
Type of address octet in integer format;
128 – Restricted number type includes unknown type and format
145 – International number type
161 – National number. The network support for this type is optional
177 – Network specific number, ISDN format
129 – Otherwise
<alpha>
String type alphanumeric representation of <number> corresponding to the entry found in
phonebook; used character set should be the one selected with command Select TE Character Set
AT+C SC S.
Examples
ATD10011;
OK
AT+CLCC
+CLCC: 1,0,0,0,0,"10011",129,"sm"
OK
RING (with incoming call)
AT+CLCC
+CLCC: 1,1,4,0,0,"02152063113",128,"gongsi"
OK
4.5 AT+CEER Extended error report
Description
ommand causes the TA to return the information text <report>, which should offer the
ll setup(originating or answering) or in-call
lease.
GPRS attach or unsuccessful PDP context activation.
Execution c
user of the TA an extended report of the reason for:
1 The failure in the last unsuccessful ca
modification.
2 The last call re
3 The last unsuccessful
4 The last GPRS detach or PDP context deactivation.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command Responses
SIM5350_ATC_V1.02 6/9/2014
33
To Next Page
Loading...
Need help?
General
