SIM5350 AT Command Set
AT+CEER=? OK
Defined values
<report>
Wrong information which is possibly occurred.String type describes cause value.
NOTE: The string refer to appendixes section “Response string of AT+CEER” of this document
Examples
AT+CEER
+CEER: Invalid/incomplete number
OK
4.6 AT+CRC Cellular result codes
Description
Write command controls whether or not the extended format of incoming call indication or GPRS
network request for PDP context activation is used. When enabled, an incoming call is indicated to
the TE with unsolicited result code “+CRING: <type>” instead of the normal RING.
Test command returns values supported by the TA as a compound value.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command Responses
AT+CRC=? +CRC: (list of supported <mode>s)
OK
Read Command Responses
AT+CRC? +CRC: <mode>
OK
Write Command Responses
AT+CRC=<mode> OK
Defined values
<mode>
0 – disable extended format
1 – enable extended format
<type>
ASYNC asynchronous transparent
SIM5350_ATC_V1.02 6/9/2014
34
To Next Page
Loading...
Need help?
General
