SimCom SIM5350

SIM5350 AT Command Set
Syntax
Write Command Responses
OK AT+CRIRS
ERROR
Defined values
None
Examples
AT+CRIRS
OK
9.13 AT+CUARTS UART and USB AT port switch
Description
This command is used to config UART or USB as AT port.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CUARTS=? +CUARTS: (0, 1)
OK
Write Command Responses
+CUARTS: <mode>
OK
AT+ CUARTS =<mode>
ERROR
Defined values
<mode>
0 use USB Application Port to send AT command
1 use UART Port to send AT command
Examples
AT+CUARTS=?
+CUARTSI: (0, 1)
OK
SIM5350_ATC_V1.02 6/9/2014
139