SIM5350 AT Command Set
OK
AT+CSTA=145
OK
4.2 AT+CHUP Hang up call
Description
This command is used to cancel voice calls. If there is no call, it will do nothing but OK response is
given.
SIM PIN References
NO 3GPP TS 27.007
Syntax
Test Command Responses
AT+CHUP=? OK
Execution Command Responses
AT+CHUP OK
Examples
AT+CHUP
OK
4.3 AT+CR Service reporting control
Description
Write command controls whether or not intermediate result code “+CR: <serv>” is returned from
the TA to the TE. If enabled, the intermediate result code is transmitted at the point during connect
negotiation at which the TA has determined which speed and quality of service will be used, before
any error control or data compression reports are transmitted, and before the intermediate result
code CONNECT is transmitted.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command Responses
AT+CR=? +CR: (list of supported <mode>s)
OK
SIM5350_ATC_V1.02 6/9/2014
30
To Next Page
Loading...
Need help?
General
