SIM5350 AT Command Set
Examples
AT+CMGW="13012832788" <CR> (TEXT MODE)
ABCD<ctrl-Z/ESC>
+CMGW:1
OK
7.16 AT+CMGD Delete message
Description
This command is used to delete message from preferred message storage <mem1> location
<index>. If <delflag> is present and not set to 0 then the ME shall ignore <index> and follow the
rules for <delflag> shown below.
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command Responses
AT+CMGD=? +CMGD: (list of supported <index>s)[,(list of supported
<delflag>s)]
OK
Write Command Responses
OK
ERROR
AT+CMGD=<index>[,<delfl
ag>]
+CMS ERROR: <err>
Defined values
<index>
Integer type; value in the range of location numbers supported by the associated memory and start
with zero.
<delflag>
an integer indicating multiple message deletion request as follows:
0 – (or omitted) Delete the message specified in <index>.
1 – Delete all read messages from preferred message storage, leaving unread messages and
stored mobile originated messages (whether sent or not) untouched.
2 – Delete all read messages from preferred message storage and sent mobile originated
messages, leaving unread messages and unsent mobile originated messages untouched.
3 – Delete all read messages from preferred message storage, sent and unsent mobile
originated messages leaving unread messages untouched.
4 – Delete all messages from preferred message storage including unread messages.
SIM5350_ATC_V1.02 6/9/2014
107
To Next Page
Loading...
Need help?
General
