SimCom SIM5350 User Manual

SIM5350 AT Command Set
AT+CVHU=0
OK
ATH
OK
3.5 ATI Display product identification information
Description
This command is used to request the product information, which consists of manufacturer
identification, model identification, revision identification, International Mobile station Equipment
Identity (IMEI) and overall capabilities of the product.
SIM PIN References
NO V.25ter
Syntax
Execution Command Responses
ATI Manufacturer: <manufacturer>
Model: <model>
Revision: <revision>
IMEI: <sn>
+GCAP: list of <name>s
OK
Defined values
<manufacturer>
The identification of manufacturer.
<model>
The identification of model.
<revision>
The revision identification of firmware.
<sn>
Serial number identification, which consists of a single line containing IMEI (International Mobile
station Equipment Identity) number.
<name>
List of additional capabilities:
+CGSM GSM function is supported
+FCLASS FAX function is supported
+DS Data compression is supported
+ES Synchronous data mode is supported.
SIM5350_ATC_V1.02 6/9/2014
15

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English