SimCom SIM5350 User Manual

SIM5350 AT Command Set
This command is used to configure the output frequency and duty for the PWM pin, the
default frequency and duty is zero.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CPWM=? OK
Read Command Responses
+CPWM: <freq>,<duty>
OK
AT+CPWM?
ERROR
Write Command Responses
OK AT+CPWM=<freq>,<duty>
ERROR
Defined values
< freq >
output frequency of the PWM pin, 200Hz is recommended and also confirmed
< duty >
0 - 100 duty cycle
Examples
AT+CPWM?
+CPWM: 200,20
OK
AT+CPWM=200,40
OK
9.3 AT+CPWMCLKS Select the source clock for the PWM
Description
This command is used to select a clock as the source clock for the PWM pin, the default
value is 3
SIM PIN References
NO Vendor
SIM5350_ATC_V1.02 6/9/2014
130

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English