SimCom SIM5350 User Manual

SIM5350 AT Command Set
AT+CGAUTO=1
OK
8.8 AT+CGANS Manual response to a network request for PDP
context activation
Description
The execution command requests the MT to respond to a network request for Packet
Domain PDP context activation which has been signaled to the TE by the RING or +CRING:
unsolicited result code. The <response> parameter allows the TE to accept or reject the request.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command Responses
AT+CGANS=? +CGANS: (list of supported <response>s),(list of supported
<L2P>s)
OK
Write Command Responses
OK AT+CGANS=[<response>,[
<L2P>,[<cid>]]]
ERROR
Defined values
<response>
A numeric parameter which specifies how the request should be responded to.
0 reject the request
1 accept and request that the PDP context be activated
<L2P>
A string parameter which indicates the layer 2 protocol to be used (see +CGDATA command).
<cid>
A numeric parameter which specifies a particular PDP context definition
1…16
Examples
AT+CGANS=0
OK
SIM5350_ATC_V1.02 6/9/2014
120

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English