SimCom SIM5350

SIM5350 AT Command Set
AT+E PI NC =? OK
Read Command Responses
+EPINC:<pin1>,<pin2>,<puk1>,<puk2> AT+E PI NC ?
+CME ERROR: <err>
Execute Command Responses
+EPINC:<pin1>,<pin2>,<puk1>,<puk2> AT+E PI NC
+CME ERROR: <err>
Defined values
<pin1>
the remaining tries of each type
<pin2>
the remaining tries of each type
<puk1>
the remaining tries of each type
<puk2>
the remaining tries of each type
Examples
AT+ESUO=?
OK
6.22 AT+EIND Indication Control Command
Description
Set command to enable +EIND unsolicited result code to indicate the readiness of SMS or PHB or
AT.
SIM PIN References
YES Vender
Syntax
Test Command Responses
AT+EIND=? +EIND: (0-4294967295)
Read Command Responses
AT+E IN D? +EIND: <ind>
Write Command Responses
OK AT+EIND=<flag>
ERROR
SIM5350_ATC_V1.02 6/9/2014
77