SIM5350 AT Command Set
+CME ERROR: <err>
Defined values
<state>
Indicates the state of Packet Domain attachment:
0 – detached
1 – attached
Examples
AT+CGATT?
+CGATT: 0
OK
AT+CGATT=1
OK
8.5 AT+CGACT PDP context activate or deactivate
Description
The write command is used to activate or deactivate the specified PDP context (s).
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command Responses
AT+CGACT=? +CGACT: (list of supported <state>s)
OK
Read Command Responses
AT+CGACT? +CGACT: [<cid>, <state>[<CR><LF>
+CGACT: <cid>, <state>
[...]]]
OK
Write Command Responses
OK
ERROR
AT+CGACT=<state>
[,<cid>]
+CME ERROR: <err>
Defined values
SIM5350_ATC_V1.02 6/9/2014
116
To Next Page
Loading...
Need help?
General
