SimCom SIM5350 User Manual

SIM5350 AT Command Set
Read Command Responses
AT+C R? +CR: <mode>
OK
Write Command Responses
AT+CR=<mode> OK
Defined values
<mode>
0 – disables reporting
1 – enables reporting
<serv>
ASYNC asynchronous transparent
SYNC synchronous transparent
REL ASYNC asynchronous non-transparent
REL sync synchronous non-transparent
Examples
AT+CR?
+CR:0
OK
AT+CR=1
OK
4.4 AT+CLCC List current calls
Description
This command is used to return list of current calls of ME. If command succeeds but no calls are
available, no information response is sent to TE.
SIM PIN References
NO 3GPP TS 27.007
Syntax
Test Command Responses
AT+CLCC=? OK
Read Command Responses
AT+CLCC? +CLCC: <n>
OK
Write Command Responses
SIM5350_ATC_V1.02 6/9/2014
31

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English