SimCom SIM5350 User Manual

SIM5350 AT Command Set
<service>
0 – SMS at command is compatible with GSM phase 2.
1 – SMS at command is compatible with GSM phase 2+.
NOTE:
0 3GPP TS 23.040 [3] and 3GPP TS 23.041 [4]
1 3GPP TS 23.040 [3] and 3GPP TS 23.041 [4]
the requirement of <service> setting 1 is mentioned under corresponding command descriptions)
<mt>
Mobile terminated messages:
0 – type not supported.
1 – type supported.
<mo>
Mobile originated messages:
0 – type not supported.
1 – type supported.
<bm>
Broadcast type messages:
0 – type not supported.
1 – type supported.
Examples
AT+CSMS=0
+CSMS:1,1,1
OK
AT+CSMS?
+CSMS:0,1,1,1
OK
AT+CSMS=?
+CSMS:(0-1)
OK
7.3 AT+CPMS Preferred message storage
Description
This command is used to select memory storages <mem1>, <mem2> and <mem3> to be used for
reading, writing, etc.
SIM PIN References
YES 3GPP TS 27.005
Syntax
SIM5350_ATC_V1.02 6/9/2014
85

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English