SIM5350 AT Command Set
▪ +CGEV: ME DETACH
The mobile termination has forced a PS detach. This implies that all active contexts have been
deactivated. These are not reported separately.
For PDP context deactivation, the following unsolicited result codes and the corresponding events
are defined:
▪ +CGEV: NW DEACT <PDP_type>, <PDP_addr>, <cid>
The network has forced a context deactivation. The <cid> that was used to activate the context is
provided if know
n to the MT. The format of the p
arameters <PDP_type>, <PDP_addr> and
<cid> are found in command +CGDCONT.
▪ +CGEV: ME DEACT <PDP_type>, <PDP_addr>, <cid>
The mobile termination has forced a context deactivation. The <cid> that was used to activate the
context is provided if known to the MT. The format of the parameters <PDP_type>, <PDP_addr>
and <cid> are found in command +CGDCONT.
For PDP context activation, the following unsolicited result codes and the corresponding events are
defined:
▪ +CGEV: ME PDN ACT <cid>
The mobile termination has activated a context. The <cid> for this context is provided to the TE.
The format of the parameters <cid> is found in command +CGDCONT.
For other PDP context handling, the following unsolicited result codes and the corresponding
events are defined:
▪ +CGEV: REJECT <PDP_type>, <PDP_addr>
A network request for context activation occurred when the MT was unable to report it to the TE
with a +CRING unsolicited result code and was automatically rejected. The format of the
parameters <PDP_type> a
nd <PDP_addr> are found in comm
and +CGDCONT.
▪ +CGEV: NW REACT <PDP_type>, <PDP_addr>, [<cid>]
The network has requested a context reactivation. The <cid> that was used to reactivate the
context is provided if known to the MT. The format of the parameters <PDP_type>, <PDP_addr>
and <cid> are found in command +CGDCONT.
Examples
AT+CGEREP=?
+CGEREP: (0-2),(0-1)
OK
AT+CGEREP?
+CGEREP: 0,0
OK
8.10 AT+CGREG GPRS network registration status
Description
SIM5350_ATC_V1.02 6/9/2014
122
To Next Page
Loading...
Need help?
General
