SIM5350 AT Command Set
+CMGL: 1,"STO UNSENT","+10011",,,145,4
Hello World
OK
7.11 AT+CMGR Read message
Description
This command is used to return message with location value <index> from message storage
<mem1> to the TE.
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command Responses
AT+CMGR=? OK
Write Command Responses
If text mode (AT+CMGF=1), command successful and SMS-
DELIVER:
+CMGR: <stat>,<oa>,[<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,
<sca>, <tosca>, <length>]<CR><LF><data>
OK
If text mode (AT+CMGF=1), command successful and SMS-
SUBMIT:
+CMGR:<stat>,<da>,[<alpha>][,<toda>,<fo>,<pid>,<dcs>,[<vp>],
<sca>, <tosca>,<length>]<CR><LF><data>
OK
If text mode (AT+CMGF=1), command successful and SMS-
STATUS-REPORT:
+CMGR: <stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
OK
If text mode (AT+CMGF=1), command successful and SMS-
COMMAND:
+CMGR:<stat>,<fo>,<ct>[,<pid>,[<mn>],[<da>],[<toda>],<length
>]<CR><LF><data>
OK
AT+CMGR=<index>
If text mode (AT+CMGF=1), command successful and CBM
storage:
+CMGR:<stat>,<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><d
ata>
SIM5350_ATC_V1.02 6/9/2014
98
To Next Page
Loading...
