SIM5350 AT Command Set
Defined values
<command>
Command passed on by the MT to the SIM:
176 READ BINARY
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
<fileID>
Integer type; this is the identifier of a elementary data file on SIM.
<p1> <p2> <p3>
Integer type; parameters to be passed on by the Module to the SIM.
<data>
Information which shall be written to the SIM (hexadecimal character format, refer AT+CSCS).
<sw1> <sw2>
Status information from the SIM about the execution of the actual command. It is returned in both
cases, on successful or failed execution of the command.
<response>
Response data in case of a successful completion of the previously issued command.(hexadecimal
character format)
Examples
AT+CRSM=?
OK
6.8 AT+CACM Accumulated call meter
Description
This command is used to reset the Advice of Charge related accumulated call meter value in SIM
file EF
ACM
.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command Responses
AT+CACM=? OK
Read Command Responses
AT+CACM? +CACM: <acm>
SIM5350_ATC_V1.02 6/9/2014
65
To Next Page
Loading...
Need help?
General
