SimCom SIM5350 User Manual

SIM5350 AT Command Set
3.21 AT&F Set all current parameters to manufacturer defaults
Description
This command is used to set all current parameters to the manufacturer defined profile.
NOTE: List of parameters reset to manufacturer default can be found in defined values, factory
default settings restorable with AT&F[<value>].
SIM PIN References
NO V.250
Syntax
Execution Command Responses
AT&F[<value>] OK
Defined values
<value>
0 Set parameters to factory defaults.
Examples
AT&F
OK
3.22 AT+GMI Request Manufacturer Identification
Description
Same as AT+CGMI
3.23 AT+GMM Request Model Identification
Description
Same as AT+CGMM
3.24 AT+GMR Request Revision Identification of Software Release
Description
Same as AT+CGMR
SIM5350_ATC_V1.02 6/9/2014
25

SimCom SIM5350 Specifications

General

Brand	SimCom
Model	SIM5350
Category	Control Unit
Language	English