Simplex 4007ES Programmer's Manual

12-4
4007ES Panel Programmer Manual (579-1167)
AMON Point Type, Continued
Editing a Point To edit an existing point:
1. Right click on the point you want to modify.
2. Click on Properties.
3. Modify the AMON Properties as required.
Figure 12-5. Editing an AMON Point Type
4. Click Apply > OK.
Deleting a Point To delete an existing point:
1. Right click on the point you want to delete.
2. Click on Delete.
3. Click on Yes to confirm.

Simplex 4007ES Specifications

General

Model	4007ES
Category	Fire Alarms
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
Display	4.3-inch color touchscreen
Power Supply	120/240 VAC, 50/60 Hz
Network Connectivity	Ethernet, RS-232, RS-485
Addressable Points	250
Communication Protocols	MAPNET II
Notification Appliance Circuits	4 NACs
Total Points	250
Annunciation	Yes
Max Devices	250
Max Notification Circuits	4
Communication Ports	RS-232, USB