Simplex 4007ES Programmer's Manual

2-5
4007ES Panel Programmer Manual (579-1167)
User Interface, Continued
Tabs and Sub-
Tabs
Each tab represents a specific component or feature of the job that must be configured. The
tabs are placed in sequential order and should be completed in that order. Certain tabs are made
up of multiple sub-tabs that are found at the bottom of the page. All sub-tabs must be opened
and configured to complete the job.
Status bar The Status bar is found at the bottom of the Programmer window and indicates the:
• Programmer status
•Time
Table 2-10. Tab list
Icon Name Sub-Tabs Allows the user to:
Panel • General Info Enter and view the general panel and branch
information.
• System Options Set the system options for the job.
• Access Levels View the default user levels for specific tasks. Right
click on the user level to view and edit its properties.
• Passcode
Assignments
View and edit the passcode assigned to each user
level.
• Features Enable or disable certain features with specific
dongles and codes.
Hardware • Tree View Display the panel components in a branch structure.
• Grid View Display the panel components in a grid structure.
Point -NA- Display the list of all the points in the FACP.
Double click on any of the points to view and edit
their properties.
List • General list View all the Panel lists.
• Latching Supervisory
Verification
View and edit the items on the Latching Supervisory
Verification list.
• Alarm Verification View and edit the items on Alarm Verification list.
• WALKTEST View and edit the items on the WALKTEST list.
• Elevator Recall View and edit the items on the Elevator Recall list.
Custom Control
• Custom Control
Create custom control equations which allow
operations to be customized per job.
• Floor Above/Floor
Below Wizard
Control the areas in which the NACs are activated.
• Selective Signaling
Wizard
Control the NACs that are activated.
• Sounder/Relay Base
Operation Wizard
Customize the default operation of select smoke
detectors
TrueAlert Zone -NA- View the points in each TrueAlert zone.
Port Vectoring -NA Assign certain cards to specific groups of events.
AMON Point Type -NA- View the analog monitor (AMON) points.
Zone Lists -NA- View the lists sorted by zone.
Network
• Network Information
• Network Points
Add and edit the lists of public and external points.

Simplex 4007ES Specifications

General

Model	4007ES
Category	Fire Alarms
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
Display	4.3-inch color touchscreen
Power Supply	120/240 VAC, 50/60 Hz
Network Connectivity	Ethernet, RS-232, RS-485
Addressable Points	250
Communication Protocols	MAPNET II
Notification Appliance Circuits	4 NACs
Total Points	250
Annunciation	Yes
Max Devices	250
Max Notification Circuits	4
Communication Ports	RS-232, USB