¾
To change the radar range offset:
• Display the Radar screen and main menu. If you can't see the
Adjust Radar button, select Return.
• Select
Adjust Radar then Installation.
• Select
Radar Range Offset then use Up and Down to
adjust the current setting.
• Select
OK.
If this does not correct the problem, consult the installation
manual for more information about the radar range offset.
8.8 Radar: PPI position - Look
Ahead/Center/Offset
You can set the position of the PPI center to:
•
Center. The PPI center remains in the central area of your
Radar screen so that all other objects move relative to your
vessel.
•
Look Ahead. The PPI center is positioned to give you the best
view ahead. This is the default.
If neither of these positions are suitable, you can customize the
PPI position by offsetting the PPI center to a different location.
The new position must be within a 75% radius of the center of the
Radar screen. If the selected position is outside of the 75% radius,
the PPI center will be moved as close as possible to the desired
position.
¾
To set the PPI center:
• Display the Radar screen and main menu. If you can't see the
Orientation button, select Return.
• Select
Orientation.
• The
Position button shows the current setting. Select it to
change the setting.
¾
To offset the position of the PPI center:
• Display the Radar screen and main menu. Then either:
◦ Use the arrow keys to move the PPI center to the new
location OR
◦ Select Orientation then Set Offset.
Radar |109
To Next Page
Loading...
Need help?
General
