◦ Low. Operate interference rejection at minimum strength.
This is the default.
◦ Medium Operate interference rejection at medium
strength.
◦ High. Operate interference rejection at maximum strength.
This setting can make it more difficult to detect some
targets and radar beacons. Use this setting only when
necessary.
• Select the new setting.
8.12 Radar: Preferences
The following choices apply only to your Radar screen. You can
show or hide the:
• North indicator
• heading marker
• range rings
• active waypoint
• active route
• waypoint or route details
You can also change the color palette.
Radar: Colors
You can change the colors (the 'palette') used to represent detail
on your radar display.
¾
To change the radar colors:
• Display the Radar screen and main menu. If you can't see the
Presentation button, select Return.
• Select
Presentation.
• The
Palette button shows the current setting.Select it to
change the setting. An option list appears.
• Select the new setting.
Radar: North indicator line
Whatever the Radar screen orientation, you can always show a
North indicator at the edge of the compass range ring. The North
indicator is a short, white arrow.
If the bearing mode is set to magnetic, the North indicator always
points to magnetic North.
114 | Radar
To Next Page
Loading...
