Simrad GB40 - Chart: Manage the Waypoints Library; Chart: Cancel Goto Waypoint

3.53 Chart: Manage the Waypoints Library
The Waypoints Library stores your waypoints and gives you access
to several navigation shortcuts.
¾ To use the Waypoints Library:
• Select Plot. (If this button is not in the main menu, make the
Chart pane active, or select Return / Settings.)
• Select
Waypoints Library.
• Select a waypoint. Choose an option:
◦ Waypoint Details. Display and edit the waypoint details.
◦ Delete Waypoint. Remove the waypoint permanently
from the Waypoints Library.
◦ Display On Chart. Select it to change the setting.
◦ Find On Chart. Center the waypoint on your Chart pane.
◦ GoTo Waypoint. Plot a line from your vessel to the
waypoint.
◦ Add Waypoint. Create a new waypoint at your current
position.
• When you are finished, select
Return.
3.54 Chart: Cancel GoTo waypoint
Note: This works only when you are navigating to a waypoint
on the
Chart.
¾ To stop navigating to a waypoint:
• Select the waypoint OR select GoTo. (If this button is not in
the main menu, make the
Chart pane active, or select Return
/ Settings
.)
• Select
Cancel GoTo Waypoint. The GB40 immediately
deactivates the active route.
Chart |79