¾
To acknowledge an alarm in the Alarm Notification box:
• Select Acknowledge in the Alarm Notification box. The
Alarm Notification box disappears from the main menu area.
• Take any corrective action required.
¾
To acknowledge an alarm in the Alarm Log:
• Select Alarms to show the Alarm Log. The new alarms are
shown in color.
• Select a new alarm message that you want to acknowledge
then select
Acknowledge OR select Acknowledge All to
acknowledge ALL the new alarm messages.
• The acknowledged alarms immediately change to a gray color
to confirm that they are acknowledged.
• Select
Return.
• Take any corrective action required.
Note: The GB40 resets some alarms, such as the Waypoint
Arrival alarm and the Waypoint Arrived End of Route alarm,
automatically after a set time period.
The GB40 resets other alarms automatically when the sensor
data is within the trigger settings again.
148 | Alarms
To Next Page
Loading...
