Robertson AP9 MK3 Autopilot
2-10 20169223D
Operation, INFO loop 1
Press the INFO button. For adjustment of each parameter use
INCREASE or DECREASE button.
IIIIIIIIIIIIIII
AUTOTRIM 0.5
Press
INFO
III
TURNRATE 40°/m
III
RADIUS nm. 0.15
Press
RATE oT STEERING
CHANGE? INC/DEC
RADIUS STEERING
CHANGE? INC/DEC
Press
IIIIIIIIIIII
OFFCOURSE. L 10°
IIIIIIIIIIIIIIIIIIIIIII
RUDDER LIM. 15°
Press
Range: 1°/min - 360°/min.
Note: The range is limited by "min
radius" value in INFO LOOP 2.
Recommended: 40°/min
Range: 0,01 nm - 10 nm
Note: The range is limited by "min
radius" value in INFO LOOP 2.
Recommended: 0,1 nm
Press INC or DEC to alter between
ROT and Radius steering.
This rudder limitation setting is only
active during autosteering on straight
courses, NOT course changes.
Range: 1° - 85°
Recommended: 15°
Range: 3° - 35°
Recommended: 10°
(First display readout depends on what has been selected by
"Rate of turn (RATEoT) steering /Radius steering", see next parameter.)
Press
Range: OFF - 3,2
Recommended: 0,5
INFO
INFO
INFO
INFO
To Next Page
Loading...
