Operation
20169223D 2-13
NAVMODE=PRIORITY
CHANGE? INC/DEC
Range: Priority-XTE-CTS-ECDIS
Recommended: Priority (unless
ECDIS is used)
Selects the Nav. mode function
Press
INFO
1/SEC OUT FREQ.
CHANGE? INC/DEC
Range: 1/sec - 5/sec
Recommended: Refer to equipment
to be interfaced.
Determines the NMEA output rate.
Press
INFO
OFFSET = XXX°
FLUXGATE COMP
Only shown if signal is present on sin/co
input or at serial HDM input.
Used when fluxgate compass is
selected as steering compass.
Press
INFO
The next press repeates the
loop, starting with language.
SW ver. mk3 V1R4
RUN: 2d 2h
Displays software version and
runtime in days and hours when in
automatic mode.
Press
INFO
To Next Page
Loading...
