22
SJ6826RT, SJ6832RT
213560ABA
Section 1 – Scheduled Maintenance Base/Engine
11
Hydraulic Tank (B)
WARNING
Environmental hazard. Immediately remove
gasoline, diesel fuel, engine oil, and hydraulic
uid spills and leaks with rags. Discard these
rags in accordance with national, state/provincial/
territorial, and local regulations. Spilled uids can
damage the environment. When spilled uids go
into the water (for example, a sewage system,
streams, rivers, or other surface water), they can
kill aquatic life.
▪ Make sure the hydraulic ller cap closes
tightly.
▪ Make sure there is no visible damage or
hydraulic leaks.
12
Hydraulic oil level (B,C)
▪ B - Frequent/periodic/pre-delivery Inspection
▪ Make sure the platform is fully lowered.
▪ Do a check on the gauge on the side of the
hydraulic oil tank. The hydraulic oil level must
be at or a small distance above the top mark
of the gauge.
▪ C - Annual Inspection
▪ Do a check on the hydraulic oil for
contamination.
▪ Make sure the oil lter is in good condition.
▪ Replace the hydraulic oil and lters if
necessary.
13
Electrical components (B)
▪ Do a check on these areas for chafed, corroded,
and loose wires:
▪ Base to platform cables and wiring harness
▪ Hydraulic and electrical wiring harnesses.
14
Hydraulic pump and motor (B)
▪ Make sure there are no loose or missing
fasteners.
▪ Make sure there is no visible damage.
15
Manifolds (B)
▪ Make sure all ttings and hoses are correctly
tightened.
▪ Make sure there is no indication of hydraulic
leakage.
▪ Make sure there are no loose wires or missing
fasteners.
▪ Make sure the manual valves on the manifold
move freely and make sure they are put back
to their initial positions.
15 14
11
12
To order go to Discount-Equipment.com
To Next Page
Loading...
