STEP 10: Selecting a Title
Projects) will be examined in this step, and the fourth of which (Insert Matrix) will be examined
in Step 11. For the
Total Recall, Channels and About tabs along with more detail on the Projects and Insert Matrix tabs,
see Chapter 4, and for the
DAW tab see Chapter 6.
to the album as a whole. All settings created within the
Total Recall, Channels and Insert Matrix
you change any of the settings in and of these tabs, you make sure you are editing the correct Title.
The left half of the
Projects
Title:
³ Double-click on the main
Projects folder to expand it.
³ Double-click on
Project 1
³ Highlight the
Title 1 folder which appears and press the Open Title button at the bottom of the screen. This makes
Title 1Total Recall,
Channels and Insert Matrix tabs is stored.
Current Project and Current Title at the top and bottom of the
window as well as in the
Notes section of the tab, as shown above.
Title 1.
Chapter 2 - Getting Started
27
Matrix
2
Owner’s Manual
To Next Page
Loading...
