ipMIDI Conguration
to match the requirements of Matrix before it can be used.
Mac
Once the driver has been installed and you have logged back in, use the Finder to navigate to the Utilities folder (in
Applications). Double-click Audio MIDI Setup, select MIDI Devices and double-click on the ipMIDI icon. Set the number
of MIDI ports to 9 in the resulting pop-up.
Windows
Once the computer has restarted after installing the driver, right-click on the ipMIDI icon in the Task Bar, select ipMidi -
MIDI over Ethernet
and set the number of MIDI ports to 9 in the resulting pop-up.
MIDI Port Mapping
MIDI control for the four Matrix Layers is split across
thenine ipMIDI ports which means that your DAW must
Note that CC (‘Continuous Controller’) Layers only use
MIDI Channel 1.
and overleaf are two examples using Pro Tools and Logic Pro.
Pro Tools
³ In the Setup menu, click on Peripherals and
select the
MIDI Controllers tab.
³ For MIDI controllers 1 and 2, select ‘
HUI’ as the
MIDI controller ‘
Type’ and assign the MIDI ports
for this layer’s DAW to the two MIDI controllers,
as listed in the table above.
As an example, if Pro Tools has been assigned to
Layer 1 (so using ipMIDI ports 1 & 2), the
MIDI
Controllers
tab should look as opposite.
Administrator
Matrix DAW Layer Matrix Channels ipMIDI port
1
1 to 8 1
9 to 16 2
2
1 to 8 3
9 to 16 4
3
1 to 8 5
9 to 16 6
4
1 to 8 7
9 to 16 8
Automation
1 to 16 9
Chapter 1 - Setup
14
Matrix
2
Owner’s Manual
To Next Page
Loading...
Need help?
General
