Chapter 4 - Matrix Remote
82
Matrix
2
Owner’s Manual
Chapter 4 - Matrix Remote
82
Matrix
2
Owner’s Manual
The Delta Tab
The Delta tab has optional features for Delta Control, and also allows you to switch between using Delta Control for analogue
automation, or Legacy automation modes (see the MIDI method on page 59, and the AFADA method on page 61).
Automation mode
This allows switching between Legacy automation (the A-FADA / MIDI method) and Delta automation modes. To switch
automation mode select either
Legacyor Delta, then restart the console using the Restart button at the bottom of the Delta
tab.
Motors O Mode
The Touch Enable button will toggle the ability to drop into writing automation when in motors off mode. For more details
see page 58.
Show Fader Levels
The Meter Enable button will toggle display of the fader (DCA) levels on the the right-hand channel meters when writing
Delta automation. This is particularly useful when the MOTORS OFF option is engaged, as the fader level can still be viewed even
though the physical fader is disengaged. For more details, see page 58.
To Next Page
Loading...
Need help?
General
