Solid State Logic SL 9000 J SERIES User Manual

To swap information from one channel to another, stab on Copy to toggle it to Swap.
The selection procedure for channels is the same as described above for the Single
Copy function.
Clear the Copy/Swap pop-up by stabbing outside it.
Subject to the setting of Always/New Pass – Play/New Pass in the Fader Status pop-
up, the Copy or Swap functions will (Always/New Pass) create a new mix pass
prefixed with the letter C or S. Always/New Pass is the recommended default.
However, if you intend to use the Copy/Swap function repeatedly, when you are
copying data to and from multiple sources for example, use Keep (see Page 5-13) to
avoid the current mix pass being forced from the Mix Pass list as it overflows.
Alternatively, set this option to Play/New Pass,and the system will incorporate the
modified data into your current mix. See Page 5-51 for more on Always/New Pass –
Play/New Pass.
Phew!
The Mix System
5-93
23.8.96

Solid State Logic SL 9000 J SERIES Specifications

General

Brand	Solid State Logic
Model	SL 9000 J SERIES
Category	Music Mixer
Language	English