Solid State Logic SL 9000 J SERIES User Manual

Record + Small Fader To Monitor
RECORD + SMALL FADER TO MON(ITOR) status provides an alternative record
mode to basic RECORD status. Selection of SMALL FADER TO MON simply swaps
the faders in the Channel and Monitor paths, and can be used in conjunction with both
RECORD and REPLAY status.
In this status, the Mic input is fed via the Large Fader and Pan to the Multitrack
Routing Matrix (the ‘Channel’ signal path) and then to the multitrack itself via the
module’s Group mix amp and Trim control associated with that track of the machine
(i.e. Track 7 is fed from Module 7’s Group Output).
The Small Faders monitor the multitrack sends (GROUP) and returns (TAPE) and feed
these signals to the main Mix outputs and monitoring of the desk, via the module’s
Small Fader pan (the ‘Monitor’ signal path), the Mix busses and the SL952J. Again,
Track 7 will be monitored on Module 7’s Small Fader.
This way of working is particularly suited where you need to handle a large number
of sources simultaneously and want to have fader control of these as close to you as
possible.
Some consoles may have local SMALL FADER TO MON buttons, allowing, for
example, Channels 25-48 only to be switched to this mode. The Large Faders on these
channels can then be used as input faders while the Large Faders on Channels 1-24 act
as monitor faders. Note that SMALL FADER TO MON has no effect in MIX status.
SL 9000 J Console Operator’s Manual
2-12
5.9.96
1-48
Routing
C
H
A
N
N
E
L
M
O
N
I
T
O
R
INPUT SELECTION PROCESSING FADER OUTPUT ASSIGNMENT
To
Bus Trims
and
Tracks
EQ
Filters
Dynamics
LINE
MIC
EQ
Filters
Dynamics
Large
Fader
10
5
0
5
10
20
30
40
50
Large
Fader
Pan
C
LR
Stereo
Subgroups
ABCD
To
Main Mix
Busses
MASTER
READY
GROUP
MASTER
INPUT
FLIP
SMALL
FADER
TO MON
RECORD REPLAY MIX
STATUS
LOCK
TAPE
GROUP
FLIP
SUB GP
RL
C
Small
Fader
Small
Fader
Pan
C
ODD EVEN

Solid State Logic SL 9000 J SERIES Specifications

General

Brand	Solid State Logic
Model	SL 9000 J SERIES
Category	Music Mixer
Language	English