Do Pre Restores the pre-automation Enable snapshot
Do Snap* Recalls any of the 62 snapshots
Enter Mark The same as pressing the MARK button
Ethernet Pen See Note 1
Events Access to the Events List
F.S.M The Fader Status Master button
Fader Prot(ection) Setup
Faders The Faders entry in the MIX-DESK menu
Final Mix Safe
GOTO 6-10 The TC 1-5 locate boxes/buttons
Goto TC Pop-up
Hard Group Setup
Ignore DCTM Varispeed See Note 2
Insert Mixing
IP
KeyP Macro* (1-50) KeyPad macros (see Page 8-15)
LTC Gen
M/C Arm
Macro Keys* (1-21) These are used to build nested macros. For example,
Key 3 may execute a sum of the functions stored in
Keys 1 and 2 by selecting Macro 1 and Macro 2 for the
entries in Key 3’s macro. Or, Key 1 may turn off Keys
2 and 3, allowing intercancelling macros to be created.
Keys may be de-latched by entering the key number
as a ’Switch Off’ function.
Manual Calibrate In RECALL/Options menu
Master Rec Enable
Midi zero now
Mix Data moves with Audio Applies to edited DiskTrack audio only
Mix To Time
Mix From Time
MotionWorker Diag
MotionWorker Status
MotionWorker Enable
MotionWorker Master
MotionWorker Rec Enable
MotionWorker Diag
Motors On/Off
MSel Keys* To select macros by ‘layer’ (1-5)
MTC Gen
Name Current Event As in the NAME MARK button
Next Event The event jog keys next to the
Prev Event TC 1-5 locate boxes/buttons
Now On the T/C Calculator
Overview Access to the Overview display
Project Settings
Fast Forward
Rewind
Next Frame Forward Frame Jog
Prev Frame Reverse Frame Jog
Macros
8-7
15.8.96
To Next Page
Loading...
Need help?
General
