The STM32 Cortex-M0 processor PM0215
24/91 Doc ID 022979 Rev 1
2.3.4 Vector table
The vector table contains the reset value of the stack pointer, and the start addresses, also
called exception vectors, for all exception handlers.
Figure 8 shows the order of the exception vectors in the vector table.
The least-significant bit of each vector must be 1, indicating that the exception handler is
Thumb code.
Figure 8. Vector table
On system reset, the vector table is fixed at address 0x00000000.
)NITIAL30VALUE
2ESET
(ARD&AULT
.-)
X
X
X
X#
X
2ESERVED
36#ALL
0END36
3YS4ICK
)21
2ESERVED
X#
X
X#
X
/FFSET%XCEPTIONNUMBER
6ECTOR
)21
)21
X
)21
X
X"#
)21NUMBER
-36
To Next Page
Loading...
