4-11
Operating Instructions Operator Manual 056404-443
4.12 Installing/Removing Table Pads
Conductive Tabletop Pads will be of one of two varieties (related to tabletop attachment):
• Pads backed with “hook-and-loop” fastener strips, which mate to hook-and-loop strips on the tabletop.
• Pads with “mushroom-type” fasteners (non hook-and-loop)
To install a table pad, place pad in position and firmly press associated fasteners together.
To remove a table pad, gently “peel” or lift the pad, as applicable, to free it from the tabletop.
Figure 4-12. Tabletop Pads
To Next Page
Loading...
