Steris 4095 - Figure 6-2. LED Relation to Battery Voltage

6-9
Routine Maintenance Operator Manual 056404-443
Figure 6-2. LED Relation to Battery Voltage
Recharge batteries as follows:
1. Connect ac power cord to table base and plug into an appropriate ac receptacle.
2. Turn Main Power Switch to ON.
3. Allow approximately 12 hours for full battery charge.
4. Verify FILLED BATTERY icon on hand control. Disconnect ac power.
> 24.2 V < 23.6 V < 23.0 V
< 24.2 V < 23.4 V < 22.8 V
<
24.0 V < 23.2 V < 22.6 V
<
23.8 V