Page COOLING SYSTEM - 32 Z001019/0_6_July 2008
SERVICE MANUAL MARINE ENGINES
05 COOLING SYSTEM
05.04.02 Install coolant pump
1 Clean all sealing surfaces on water pump and on
motorblock.
2 Put on new sealing (ill.2/pos.1).
3 Align water pump on motorblock. Mount screws and
nuts and tighen with standard torque for these size.
4 Further assembly is done in reverse order, in
accordance with 01.00.04 remove timing belt.
5 Adjust control according to instructions in paragraph
01.00.05 engine timing adjustment procedure.
04.02 ill.1
04.02 ill.2
1
ToC
To Next Page
Loading...
Need help?
General
