STEYR 4 CYLINDER User Manual

06 ELECTRICAL SYSTEM
Page ELECTRICAL SYSTEM - 16 Z001019/0_6_July 2008
SERVICE MANUAL MARINE ENGINES
1
2
34
06.03 REPLACE STARTER MOTOR
1 Disconnect battery.
2 Remove cover of E-box. Remove E-box.
3 Loosen terminal +30 (ill.2/pos.1) on magnetic switch
by means of (SW13).
4 Loosen start signal wiring (terminal 50) (ill.2/pos.2)
by means of (SW10).
5 Loosen two hexagon screws (ill.2/pos.3) (SW13) of
starter bracket.
6 Loosen two screws (SW8) (ill.2/pos.4), remove starter.
NOTE: Have starter motor repaired in an
authorized STEYR workshop.
After assembly, coat all electric
supplies with rubber sealing
Z909570/0.
03.00 ill.1
03.00 ill.2
ToC

STEYR 4 CYLINDER Specifications

General

Brand	STEYR
Model	4 CYLINDER
Category	Engine
Language	English