Z001019/0_8_Octobre 2011 Page GENERAL-45
GENERAL
SERVICE MANUAL MARINE ENGINES
ToC
08.01 ill.5
08.01 ill.6
08.01 ill.7
08.01 ill.8
Flywheel screws
(use LOCTITE 243 on thread)
75 Nm +/- 4
Vibration damper screws
(apply oil to thread and screwhead support)
135 Nm (2x) +/- 7
Screw, rear ring carrier
(use LOCTITE 243 on thread)
1. step: 8 Nm +/- 1
2. step: 30 Nm +/- 3
Nut, camshaft sprocket
(taper degreased on camshaft, thread
lubricated)
1. step: 80 Nm +/- 4
2. step: 240 Nm +/-12
To Next Page
Loading...
Need help?
General
