STEYR 4 CYLINDER User Manual

GENERAL
Page GENERAL-48 Z001019/0_8_Octobre 2011
SERVICE MANUAL MARINE ENGINES
ToC
08.01 ill.17
08.01 ill.18
08.01 ill.19
08.01 ill.20
Screws, intercooler
28 Nm +/- 2
Studs, turbocharger
M8 - 23 Nm +/- 2
M10 - 35 Nm +/-2
Plug screws, zinc anode
50 Nm +/- 5
Crown nut, oil cooler
(use LOCTITE 243 on thread)
55 Nm +/- 5
Nut, turbocharger
(greased with NEVER SEEZ )
M8 - 25 Nm +/-2
M10 - 45 Nm +/-2
NOTE:
for all clamps
3,5 Nm

STEYR 4 CYLINDER Specifications

General

Brand	STEYR
Model	4 CYLINDER
Category	Engine
Language	English